[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:14231] Re: ncftpのproxy設定
-
From:HIGUCHI Chihiro
-
Date:Tue, 18 Jun 2002 10:16:06 +0900 (JST)
- Subject: [plamo:14231] Re: ncftpのproxy設定
- From: HIGUCHI Chihiro <higuchi@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 18 Jun 2002 10:14:59 +0900 (JST)
樋口です.
From: A Matsui <matsui.akira@canon.co.jp>
> ncftpでproxyサーバ経由でFTPサーバに接続するにはどうすればよろしいでしょ
> うか.
Ver 3 ということであれば,~/.ncftp/firewall というファイルができて
いると思います.ここで,FireWall のけいしきを指定し,必要な設定を
します.私の環境では,type 1 なので,それに従って FireWall のホスト名
などの指定をします.
% more ~/.ncftp/firewall
# NcFTP firewall preferences
# ==========================
#
# If you need to use a proxy for FTP, you can configure it below.
# If you do not need one, leave the ``firewall-type'' variable set
# to 0. Any line that does not begin with the ``#'' character is
# considered a configuration command line.
#
# NOTE: NcFTP does NOT support HTTP proxies that do FTP, such as "squid"
# or Netscape Proxy Server. Why? Because you have to communicate with
# them using HTTP, and this is a FTP only program.
#
# Types of firewalls:
# ------------------
#
# type 1: Connect to firewall host, but send "USER user@real.host.name"
#
# type 2: Connect to firewall, login with "USER fwuser" and
# "PASS fwpassword", and then "USER user@real.host.name"
#
# type 3: Connect to and login to firewall, and then use
# "SITE real.host.name", followed by the regular USER and PASS.
#
# type 4: Connect to and login to firewall, and then use
# "OPEN real.host.name", followed by the regular USER and PASS.
#
# type 5: Connect to firewall host, but send
# "USER user@fwuser@real.host.name" and
# "PASS pass@fwpass" to login.
#
# type 6: Connect to firewall host, but send
# "USER fwuser@real.host.name" and
# "PASS fwpass" followed by a regular
# "USER user" and
# "PASS pass" to complete the login.
#
# type 7: Connect to firewall host, but send
# "USER user@real.host.name fwuser" and
# "PASS pass" followed by
# "ACCT fwpass" to complete the login.
#
# type 0: Do NOT use a firewall (most users will choose this).
#
firewall-type=1
#
#
#
# The ``firewall-host'' variable should be the IP address or hostname of
# your firewall server machine.
#
firewall-host=XXXXX
#
#
#
# The ``firewall-user'' variable tells NcFTP what to use as the user ID
# when it logs in to the firewall before connecting to the outside world.
#
firewall-user=higuchi
#
- Follow-Ups
-
- [plamo:14232] Re: ncftpのproxy設定, A Matsui
- References
-
- [plamo:14229] ncftpのproxy設定, A Matsui
[検索ページ]
[メール一覧]
Plamo ML 公開システム