[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[plamo:21593] Re: xsnow にびっくり(Plamo-unstableインストール報告)

2004年 1月 1日 木曜日 08:52、名倉昭一 さんは書きました:
>    名倉です。

> > 吹雪で吹きとばされるサンタ＆トナカイもgood!
>
>   サンタさんがふきとばされるのはちょっと
> 　吹雪をものともせず進むサンタさんのほうがいいな。

そうですね、降り掛かる困難の数々に恐れず、あきらめずに前に進む方ってイメージでいいですね。
来年の元旦には今日の自分より成長した自分を感じられるといいなーって、日々精進いたします。

ついでと言ってはなんですが、クリスマスのころからbootの時表示されるmessageに悩んでいます。
xsnowで遊んでるとき何か変更してしまったのかな？
dmesgには出てこないのですが、WEBの履歴のようなものもboot messageには出ていたりします。
遊んだところをおかたずけしながら、さぐってみているのですが...
hp ノートPC nx9005    windows xp home とdual boot にしてます。

/dev/hda5:Duplicate blocks found...   invoking duplicate block passes.

##################################
fsck returned error code - Reboot Now!
##################################

それでdmsegは、こんな感じです。plamo3.3を入れてます。

kumiko@nx9005:~$ dmesg
Linux version 2.4.22 (root@nx9005) (gcc version 2.95.3 20010315 (release)) #21 
SMP Mon Dec 1 23:25:02 JST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
 BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
 BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
 BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009f800 (usable)
 user: 000000000009f800 - 00000000000a0000 (reserved)
 user: 00000000000d0000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 000000001bef0000 (usable)
446MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 114416
zone(0): 4096 pages.
zone(1): 110320 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 PTLTD                                     ) @ 0x000f7450
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1bef8c16
ACPI: FADT (v001 ATI    Raptor   0x06040000 ATI  0x000f4240) @ 0x1befee4c
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1befeec0
ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x1befeee8
ACPI: DSDT (v001    ATI U1_M1535 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: MADT not present
Kernel command line: root=/dev/hda3 ro acpi=ht mem=457664K
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1523.895 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3040.87 BogoMIPS
Memory: 449248k/457664k available (1762k kernel code, 8028k reserved, 728k 
data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD mobile AMD Athlon(tm) XP1800+ stepping 01
per-CPU timeslice cutoff: 731.77 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1523.8254 MHz.
..... host bus clock speed is 265.0129 MHz.
cpu: 0, clocks: 2650129, slice: 1325064
CPU0<T0:2650128,T1:1325056,D:8,S:1325064,C:2650129>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
PCI: Found IRQ 11 for device 00:0a.1
IRQ routing conflict for 00:0a.0, have irq 5, want irq 11
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 3 for device 00:08.0
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (10b9,5457,103c,0024)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PCI: Found IRQ 11 for device 00:12.0
eth0: NatSemi DP8381[56] at 0xdc800000, 00:0b:cd:e9:76:52, IRQ 11.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 379M
agpgart: unsupported bridge
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.7.0 20020828 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: HITACHI_DK23EA-30, ATA DISK drive
hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.32 time 23:22:16 Dec  1 2003
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:0a.0
IRQ routing conflict for 00:0a.0, have irq 5, want irq 11
PCI: Sharing IRQ 11 with 00:0a.1
PCI: Enabling device 00:0a.1 (0080 -> 0082)
PCI: Found IRQ 11 for device 00:0a.1
IRQ routing conflict for 00:0a.0, have irq 5, want irq 11
usb.c: registered new driver hub
Yenta IRQ list 0e98, PCI irq5
Socket status: 30000006
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
host/uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 128k freed
Adding Swap: 136512k swap-space (priority -1)
spurious 8259A interrupt: IRQ7.
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370740, 
sector=1582752
end_request: I/O error, dev 03:05 (hda), sector 1582752
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370742, 
sector=1582754
end_request: I/O error, dev 03:05 (hda), sector 1582754
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370744, 
sector=1582756
end_request: I/O error, dev 03:05 (hda), sector 1582756
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370746, 
sector=1582758
end_request: I/O error, dev 03:05 (hda), sector 1582758
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370748, 
sector=1582760
end_request: I/O error, dev 03:05 (hda), sector 1582760
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370750, 
sector=1582762
end_request: I/O error, dev 03:05 (hda), sector 1582762
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x40 { UncorrectableError }, LBAsect=18370752, 
sector=1582764
end_request: I/O error, dev 03:05 (hda), sector 1582764
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f 
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: link up.
Follow-Ups
[plamo:21594] Re: xsnowにびっくり(Plamo-unstableインストール報告), Iqbal Abdullah
References
[plamo:21592] Re: xsnowにびっくり(Plamo-unstableインストール報告), 名倉昭一
[検索ページ] [メール一覧]
Plamo ML 公開システム