[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:00726] Re: How to setup Plamo to ISA machine?
-
From:KOJIMA Mitsuhiro
-
Date:Tue, 29 Dec 1998 23:53:43 +0900
- Subject: [plamo:00726] Re: How to setup Plamo to ISA machine?
- From: KOJIMA Mitsuhiro <kojima@xxxxxxxxxxxxxxxxxxx>
- Date: Tue, 29 Dec 1998 23:53:43 +0900
- Posted: Tue, 29 Dec 1998 21:26:30 +0900
こじま@実家の(妹の)アカウントから普段使っているサーバに投げたら、
sendmail の relay check で引っかかってしまった、です。
# 自分でそういう設定にしたから余計腹が立つ(苦笑
From: tanimura <tanimura@osa.att.ne.jp>
Subject: [plamo:00724] Re: How to setup Plamo to ISA machine?
Date: Tue, 29 Dec 1998 06:15:57 +0900
Message-ID: <3687F78E.1EB61370@osa.att.ne.jp>
> しかし、やはり boot 出来ません。
> ご参考になればと思い、状況を以下に書きます。
> (手で写したので、細部に間違いがあるかも知れません)
> LILO ... のあと boot: で parameter なし CR のみ で
> Loading boot disk ......
> uncompress の文字がチラット見えたあと、画面いっぱいに
> --------------------------
> tty02 at 0x03e8 (irq=4) is a 16550a
> PS/2 auxiliary pointing device detected --- driver installed
> APM BIOS 1.1 Flags 0x02(Driver version 1.2)
> Entry f000:de30 cseg16 f000 dseg 40 cseg len ffff, dseg len ffff
> Unable to handle Kernel NULL pointer dereference at virtual
> current->tss.cr3=00101000, %cr3=00101000
> * pde=00102067
> * pte=00000000
> Oops:0000
場所的に APM BIOS のあたりで引っかかってますね。上記
ftp://ftp.linet.gr.jp/pub/Plamo/Update/nopci.img を APM BIOS を抜いた
ものに入れかえてみたので、これでどうなるか試してみてください。
-------
こじま
- Follow-Ups
-
- [plamo:00731] Re: How to setup Plamo to ISA machine?, tanimura
- References
-
- [plamo:00724] Re: How to setup Plamo to ISA machine?, tanimura
[検索ページ]
[メール一覧]
Plamo ML 公開システム