[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[plamo:02501] ASUS2740 X Setup



こにちわ。ずいぶん前にめーリングリストに参加していたもんですが、
もう一度がんばってみようと思い。設定をはじめました。
Xが走らないんです。原因が不明なため皆さんのお力をお借りした
XF86Configファイルを貼り付けました。
ビデオカードはASUSi2740です。
plamo1.3をいれ。Linux japan1月号のXBF0.9.10バージョンを入れて、
xf86configを正しくやったつもりですが、エラーが出て走りません。
config設定ファイルはこれです。

# File generated by xf86config.
#
# Copyright (c) 1995 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# For OSs that support Dynamically loaded modules, ModulePath can be
# used to set a search path for the modules.  This is currently supported
# for Linux ELF, FreeBSD 2.x and NetBSD 1.x.  The default path is shown
# here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which dynamically loadable modules to load.  Dynamically loadable
# modules are currently supported only for Linux ELF, FreeBSD 2.x
# and NetBSD 1.x.  Currently, dynamically loadable modules are used
# only for some extended input (XInput) device drivers.
# **********************************************************************
#
# Section "Module"
#
# This loads the module for the Joystick driver
#
# Load "xf86Jstk.so"
#
# EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    DontZoom

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#       DisableVidModeExtension

# Uncomment this to enable the use of a non-local xvidtune client.

#       AllowNonLocalXvidtune

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#       DisableModInDev

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#       AllowNonLocalModInDev

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol "Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line

#    Protocol "Xqueue"

    AutoRepeat 500 5
# Let the server do the NumLock processing.  This should only be required
# when using pre-R6 clients
#    ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

# To disable the XKEYBOARD extension, uncomment XkbDisable.

    XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    XkbOptions  ""

    XkbKeymap   "xfree86(us)"


EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate 9600
#    SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
    Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Xinput section -- this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "Xinput"
#    SubSection "WacomStylus"
#        Port "/dev/ttyS1"
#        DeviceName "Wacom"
#    EndSubSection
#    SubSection "WacomCursor"
#        Port "/dev/ttyS1"
#    EndSubSection
#    SubSection "WacomEraser"
#        Port "/dev/ttyS1"
#    EndSubSection
#
#    SubSection "Elographics"
#        Port "/dev/ttyS1"
#        DeviceName "Elo"
#        MinimumXPosition 300
#        MaximumXPosition 3500
#        MinimumYPosition 300
#        MaximumYPosition 3500
#        Screen 0
#        UntouchDelay 10
#        ReportDelay 10
#    EndSubSection
#
#    SubSection "Joystick"
#        Port "/dev/joy0"
#        DeviceName "Joystick"
#        TimeOut 10
#        MinimumXPosition 100
#        MaximumXPosition 1300
#        MinimumYPosition 100
#        MaximumYPosition 1100
#        # CenterX 700
#        # CenterY 600
#        Delta 20
#    EndSubSection
#
# The Mouse Subsection contains the same type of entries as the
# standard Pointer Section (see above), with the addition of the
# DeviceName entry.
#
#    SubSection "Mouse"
#        Port "/dev/mouse2"
#        DeviceName "Second Mouse"
#        Protocol "Logitech"
#    EndSubSection
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "PC-DH171"
    VendorName  "NEC"
    ModelName   "DH171"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 79.0

#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock 45
#        HTimings 1024 1048 1208 1264
#        VTimings 768 776 784 817
#        Flags  "Interlace"
#    EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817
Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync
+VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine  "640x480"    31.5   640  656  720  840   480  481  484
500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync
+vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x400"     36     640  696  752  832   480  481  484
509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985
Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync
+vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777
806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"     45.8   640  672  768  864   480  488  494
530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876
892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600  616  621
657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777
806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165
Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline  "800x600"    69.65  800  864  928 1088   600  604  610
640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054

# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788
822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864"   110   1152 1240 1324 1552   864  864  876  908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040
1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync
+VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781
802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064

# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204
1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885
902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync
+VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync
+VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync
+VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046
1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync
+VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync
+VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384"    20.160 512  528  592  640   384  385  388
404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384"    22     512  528  592  640   384  385  388
404 -HSync -VSync

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336  384  400   200  204  205  225
Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336  384  400   240  245  246  262
Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336  384  400   240  244  246  262
Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416  448  512   300  301  302  312
Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416  480  528   300  301  303  314
Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424  488  520   300  319  322  333
Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312
Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496  576  632   300  301  303  314
Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496  576  632   300  301  303  314
Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504  584  624   300  319  322  333
Doublescan

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier "Generic VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    Chipset "generic"

#    VideoRam 256

#    Clocks 25.2 28.3

EndSection

# Sample Device for accelerated server:

# Section "Device"
#    Identifier "Actix GE32+ 2MB"
#    VendorName "Actix"
#    BoardName "GE32+"
#    Ramdac "ATT20C490"
#    Dacspeed 110
#    Option "dac_8_bit"
#    Clocks  25.0  28.0  40.0   0.0  50.0  77.0  36.0  45.0
#    Clocks 130.0 120.0  80.0  31.0 110.0  65.0  75.0  94.0
# EndSection

# Sample Device for Hercules mono card:

# Section "Device"
#    Identifier "Hercules mono"
# EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "ASUS2740"
    VendorName  "ASUS"
    BoardName   "2740"
    #VideoRam    8192
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    # Use Device "Generic VGA" for Standard VGA 320x200x256
    #Device      "Generic VGA"
    Device      "ASUS2740"
    Monitor     "PC-DH171"
    Subsection "Display"
        Depth       8
        # Omit the Modes line for the "Generic VGA" device
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
        # Use Virtual 320 200 for Generic VGA
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x480" "800x600" "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection

# The 16-color VGA server

Section "Screen"
    Driver      "vga16"
    Device      "Generic VGA"
    Monitor     "PC-DH171"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection

# The Mono server

Section "Screen"
    Driver      "vga2"
    Device      "Generic VGA"
    Monitor     "PC-DH171"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)

Section "Screen"
    Driver      "accel"
    Device      "ASUS2740"
    Monitor     "PC-DH171"
    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x480" "800x600" "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection
##############################################################


またstartxと打ったときに出たエラーは
execve failed for /usr/X11R6/bin/X (errno2)
-X1TransSocketUNIXX connect! can't conrect;errno2
-X1TransSocketUNIXX connect! can't conrect;errno2
-X1TransSocketUNIXX connect! can't conrect;errno2
-X1TransSocketUNIXX connect! can't conrect;errno2
-X1TransSocketUNIXX connect! can't conrect;errno2
-X1TransSocketUNIXX connect! can't conrect;errno2
Xinit : no such file or directory (errno2);unable connect X server
Xinit no such process (errno3) server error
でした。なにかわかることがありましたら、どううかおちからになってください。

Follow-Ups
[plamo:02503] Re: ASUS2740 X Setup, Yasutada SHIMAZAKI

[検索ページ] [メール一覧]
Plamo ML 公開システム