[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:02656] dmesg & cat /proc/pci の結果
-
From:Akinori Nakamura
-
Date:Wed, 19 May 1999 08:14:15 +0900
- Subject: [plamo:02656] dmesg & cat /proc/pci の結果
- From: Akinori Nakamura <qzi14242@xxxxxxxxxxx>
- Date: Wed, 19 May 1999 08:14:15 +0900
- Posted: Wed, 19 May 1999 08:13:40 +0900
こんにちは、中村昭徳です。
メルコのLGY PCI TXRの認識ですが、やはりうまくいっていないようです。
先ほど、教えていただいた通り、dmesgを実行したり、/proc/pciなどのファイ
ルを覗いてみました。
しかし、私にはどうやって問題を解決したらいいのかわかりません。下記にそ
の結果を張り付けてみました。長文になり、皆さんにはご迷惑をおかけしますが、
またアドバイスをお願いします。
dmesg
Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fda90
pcibios_init : BIOS32 Service Directory entry at 0xfdaa1
pcibios_init : PCI BIOS revision 2.00 entry at 0xfdadc
Probing PCI hardware.
Calibrating delay loop.. ok - 39.83 BogoMIPS
Memory: 13920k/16384k available (1224k kernel code, 384k reserved, 856k
data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.36 (root@hurricane) (gcc version 2.7.2.3) #2 Thu Jan
14 04:55:45 JST 1999
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
PS/2 auxiliary pointing device detected -- driver installed.
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
hda: QUANTUM FIREBALL1080A, 1039MB w/83kB Cache, CHS=528/64/63
hdc: FX400, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: SPP port present
ppa: EPP 1.7
ppa: Probing port 0278
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
scsi : detected total.
Partition check:
hda: hda1 hda2 hda3
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 110876k swap-space (priority -1)
main:~# cat /proc/interrupts
0: 196910 timer
1: 2 keyboard
2: 0 cascade
4: 365 + serial
13: 1 math error
14: 94197 + ide0
15: 0 + ide1
main:~# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
main:~# cat /proc/pci
PCI devices found:
Bus 0, device 20, function 0:
IDE interface: OPTi 82C621 (rev 17).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
I/O at 0x80000000.
Bus 0, device 2, function 0:
VGA compatible controller: Trident TG 9660 / Cyber9385 (rev 211).
Medium devsel. Fast back-to-back capable.
Non-prefetchable 32 bit memory at 0x40000000.
Bus 0, device 1, function 0:
ISA bridge: OPTi 82C558 Viper-M ISA+IDE (rev 17).
Medium devsel. Master Capable. No bursts.
Bus 0, device 0, function 0:
Host bridge: OPTi 82C557 Viper-M (rev 17).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
main:~#
----------------------------------------
e-mail :qzi14242@nifty.ne.jp
wsb12330@biglobe.ne.jp
中村 昭徳 (Akinori Nakamura)
- Follow-Ups
-
- [plamo:02657] Re: dmesg & cat /proc/pciの結果, Shigeo Sagai
[検索ページ]
[メール一覧]
Plamo ML 公開システム