[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:08330] Re: Xawtv Segmentation fault
-
From:Ken Takashima
-
Date:Wed, 17 Jan 2001 22:08:40 +0900
- Subject: [plamo:08330] Re: Xawtv Segmentation fault
- From: "Ken Takashima" <ken27@xxxxxxxxxxxx>
- Date: Wed, 17 Jan 2001 22:08:40 +0900
- Posted: Wed, 17 Jan 2001 22:13:12 +0900
佐賀井@電中研さん、中谷千絵さん、アドバイスありがとうござい
ます。
いつもお世話になっている、たかしまです。恐縮です。
KNOWN_PROBLEMS と言うファイルに、
------------------------------------------------------------
This is probably some library compatibility problem. I've
never seen this myself. According to a report I've received
upgrading Xfree86 to 4.0 fixed this. Probaby xawtv does'nt
work with 3.3.x libraries if itwas compiled against the 4.0.x
versions.
------------------------------------------------------------
と言うメッセージが Xawtv の ver.3.22 以上には出ていました。
Xfree86 3.3.6を使っているので、ver.3.21を使うことにしました。
しかし、
alpha:~$ xawtv
This is xawtv-3.21, running on Linux/i686 (2.2.18)
visual: id=0x22 class=4 (TrueColor), depth=16
x11: 800x600, 16 bit/pixel, 1600 byte/scanline, DGA
waitpid: No child processes
waitpid: No child processes
Segmentation fault
と、言うメッセージが出てXawtv は、起動してくれません。
色々と、オプションを付けてみましたが駄目でした。
インストール時に/usr/X11R6/lib/X11/xawtvrcも生成されません。
~/.xawtv は、
------------------------------
[global]
freqtab = japan-bcast
pixsize = 128 x 96
pixcols = 1
jpeg-quality = 75
mjpeg-quality = 75
toggle-mouse = 0
keypad-ntsc = no
osd = yes
[Camera]
source = Composite1
key = K
[defaults]
norm = NTSC-JP
capture = over
source = Composite1
------------------------------
こう変更しました。
/etc/modules.conf は、
------------------------------
lias char-major-89 i2c-dev
post-install i2c-dev
alias char-major-81 videodev
alias char-major-81-0 bttv
pre-install bttv
post-remove bttv
options bttv card=34 radio=0
options tuner type=4
------------------------------
こう変更し、付け加えました。
アンインストールのやり方が分からないので、毎回上書きでインス
トールしています。
起動メッセージには、
------------------------------------------------------------
Linux video capture interface: v1.00
i2c: initialized
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 96, irq: 11,
memory: 0xea009000
bttv: 1 Bt8XX card(s) found.
bttv0: No fader chip: TEA6300
bttv0: mode1: BT878
------------------------------------------------------------
と、出ています。
上手く行かないのは、ひとえに僕のいたらなさと、ドキュメント類
の読みのいい加減さだと思っています。それと試行錯誤がまだまだ
足りない・・・。
ですが、よろしかったら、またアドバイスよろしくお願いいたしま
す。
では、失礼いたします。
-----
たかしま より
- Follow-Ups
-
- [plamo:08332] Re: Xawtv Segmentation fault, Chie Nakatani
- [plamo:08336] Re: Xawtv Segmentation fault, Shigeo Sagai
- References
-
- [plamo:08318] Xawtv Segmentation fault, Ken Takashima
- [plamo:08324] Re: Xawtv Segmentation fault, Shigeo Sagai
[検索ページ]
[メール一覧]
Plamo ML 公開システム