[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[plamo:28143] Re: libata installer

冨岡です@ 名倉さんの i430TX で期待したのですが!

ASUS P/I-P55T2P4(Rev 2.3) での結果です。

# lspci -v  (installer の lspci)
00:00.0 Class 0600: 8086:1250 (rev 01)
	Flags: bus master, medium devsel, latency 32

00:07.0 Class 0601: 8086:7000 (rev 01)
	Flags: bus master, medium devsel, latency 0

00:07.1 Class 0101: 8086:7010 (prog-if 80 [Master])
	Flags: bus master, medium devsel, latency 32
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
	I/O ports at e800 [size=16]

00:07.2 Class 0c03: 8086:7020 (rev 01)
	Flags: bus master, medium devsel, latency 32, IRQ 10
	I/O ports at e400 [size=32]

00:0a.0 Class 0300: 102b:0519 (rev 01)
	Flags: stepping, medium devsel, IRQ 11
	Memory at e6800000 (32-bit, non-prefetchable) [size=16K]
	Memory at e7800000 (32-bit, prefetchable) [size=8M]
	Expansion ROM at 10000000 [disabled] [size=64K]

=== 以下 dmesg ===
Linux version (kojima@xeon02) (gcc バージョン 3.4.3) #1 PREEMPT Tue May 15 20:28:37 JST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 0000000007f00000 end: 0000000008000000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
128MB LOWMEM available.
Entering add_active_range(0, 0, 32768) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    32768
  HighMem     32768 ->    32768
early_node_map[1] active PFN ranges
    0:        0 ->    32768
On node 0 totalpages: 32768
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 224 pages used for memmap
  Normal zone: 28448 pages, LIFO batch:7
  HighMem zone: 0 pages used for memmap
DMI 2.0 present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
Detected 299.162 MHz processor.
Built 1 zonelists.  Total pages: 32512
Kernel command line: initrd=initrd.gz BOOT_IMAGE=vmlinuz 
No local APIC present or hardware disabled
mapped APIC to ffffd000 (01101000)
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 111556k/131072k available (2637k kernel code, 18996k reserved, 899k data, 244k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa9000 - 0xfffff000   ( 344 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xc8800000 - 0xff7fe000   ( 879 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
      .init : 0xc0478000 - 0xc04b5000   ( 244 kB)
      .data : 0xc039360f - 0xc04743f4   ( 899 kB)
      .text : 0xc0100000 - 0xc039360f   (2637 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 598.68 BogoMIPS (lpj=299344)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 008001bf 808009bf 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008001bf 808009bf 00000000 00000000 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD-K6(tm) 3D processor stepping 00
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0430, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
libata version 2.00 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:0a.0
PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:07.0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 13757k freed
audit: initializing netlink socket (disabled)
audit(1179761984.561:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
Real Time Clock Driver v1.12ac
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
megaraid cmm: (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: (Release Date: Sun Jul 16 12:27:22 EST 2006)
Fusion MPT base driver 3.04.03
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.03
Fusion MPT FC Host driver 3.04.03
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Suspend v2.2.9.7
Time: tsc clocksource has been installed.
Suspend2 Checksumming support registered.
Suspend2 Userspace Storage Manager support registered.
Suspend2 Userspace UI support registered.
Suspend2 Compressor support registered.
Suspend2 Encryptor support registered.
Suspend2 Block I/O support registered.
Suspend2 Swap Allocator support registered.
Suspend2 File Allocator support registered.
Freeing unused kernel memory: 244k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Unikey successfully installed.
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
ReiserFS: fd1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on fd1
ext3: No journal on filesystem on fd1
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

Module                  Size  Used by    Not tainted
floppy                 56164  1 
encode_eucjp          243456  0 
unikey                 10572  0 
snd_hda_intel          17208  0 
snd_hda_codec         161456  1 snd_hda_intel
snd_pcm                70288  2 snd_hda_intel,snd_hda_codec
snd_timer              20104  1 snd_pcm
snd                    44164  4 snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore               6368  1 snd
snd_page_alloc          7688  2 snd_hda_intel,snd_pcm
usb_storage            65984  0 
libusual               15252  1 usb_storage
usbhid                 34720  0 
hid                    23940  1 usbhid
ff_memless              5128  1 usbhid
uhci_hcd               21396  0 
usbcore               119196  5 usb_storage,libusual,usbhid,uhci_hcd

CPU を Pentium(200M) にしても、残念ながら認識されませんでした。

bios で USB を enable にしたら認識されてる。使えるのかなぁ?。基板には

# Plamo-3.3 までは動作していた物で、 1CD-Plamo(Plamo Linux Expert 付属)
# も動作します。
# 現用しているマシンではありません。以前の仕事 (DOS, Win95, 98) の保守
# 用に置いていた物ですので、参考程度です。


[plamo:28144] Re: libata installer, 名倉昭一
[plamo:28105] libata installer, KOJIMA Mitsuhiro

[検索ページ] [メール一覧]
Plamo ML 公開システム