[plamo:23105] Re: hotplug=off

[Tadashi Nakamura]

----- Original Message ----- 
From: "Norimasa Matsumoto" <matsu@bi.wakwak.com>
To: <plamo@linet.gr.jp>
Sent: Sunday, July 04, 2004 6:37 PM
Subject: [plamo:23098] Re: plamo-4.0_02.iso


>   lspci -v を実行すれば答えが見えるかもしれない。

lspci -v をやってみました。その結果ですが
もし何か見えたら教えて下さい。
hotplug=off で起動すると、NIC も認識されていませんので
100% 悲しいです。

00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
 Flags: bus master, medium devsel, latency 32
 Memory at d8000000 (32-bit, prefetchable) [size=64M]
 Capabilities: [a0] AGP version 1.0

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev
03) (prog-if 00 [Normal decode])
 Flags: bus master, 66Mhz, medium devsel, latency 64
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32

00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
 Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if
80 [Master])
 Flags: bus master, medium devsel, latency 32
 I/O ports at f000 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
 Flags: bus master, medium devsel, latency 32, IRQ 10
 I/O ports at e000 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
 Flags: medium devsel, IRQ 9

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
 Subsystem: Allied Telesyn International: Unknown device a11f
 Flags: bus master, medium devsel, latency 32, IRQ 10
 I/O ports at e400 [size=256]
 Memory at e1000000 (32-bit, non-prefetchable) [size=256]
 Capabilities: [50] Power Management version 2

00:0f.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev
54) (prog-if 00 [VGA])
 Flags: medium devsel, IRQ 11
 Memory at dc000000 (32-bit, non-prefetchable) [size=64M]
 Expansion ROM at <unassigned> [disabled] [size=64K]

--
Tadashi Nakamura
tn_mls@hotmail.com