[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:26436] Re: ATAPI DVD-RAMがマウント(認識)できません
-
From:msharu
-
Date:Sat, 24 Sep 2005 20:01:20 +0900 (JST)
- Subject: [plamo:26436] Re: ATAPI DVD-RAMがマウント(認識)できません
- From: msharu <myspring_sato@xxxxxxxxxxxxxxxxx>
- Date: Sat, 24 Sep 2005 20:01:22 +0900
- Organization: mspring
名倉さま
佐藤明彦 です。
早速のご連絡有難うございます。
> > 今回の設定で、Plamo で ATAPI DVD-RAM のマウントが うまくできません。
> >
> > (3.2)rootでもマウントできず
> > harup:~# mount /cdrom/
> > mount: /dev/cdrom is not a valid block device
> CDのボディですがDVD-RAMドライブはcdではありません。
> 磁気ディスクのつもりで扱ってください。
>
ここで、今は Multi_bootであり 同じハードウェアとBIOSを使用している
vine と Debianでは、CDとしても認識したように感じました。
だから Plamo は、何故認識できないのかなと、感じるのは、
おかしいでしょうか。
それと、ご参考までに、マルチブートの設定の状況をご報告します。
その内容は、下のようにしました。
- - - - - - - - Vine、Debian等の設定概要 - - - - - - - - -
vine-2005(hdb3)、Debian-2005(hdb6) の各々を一括して インストールした後に、
Plamoのviエディターで、設定ファイル/etc/grub.conf に編集しました。
mspring@harup:~$ cat /etc/grub.conf
# GRUB configuration file generated by 'grubconfig'
#
# Start GRUB global section
default 0
timeout 30
fallback 1
splashimage (hd0,2)/boot/grub/grubimg.xpm.gz
#DOS bootable partition config begins
title = Windows (hda1)
rootnoverify (hd0,0)
makeactive
chainloader +1
title Plamo-4.0_2.4.27_hp-2005 (hda3)
root (hd0,2)
kernel (hd0,2)/vmlinuz-2.4.27-hp05 root=/dev/hda3 ro
title Plamo-4.0.test-2005 (hda3)
root (hd0,2)
kernel (hd0,2)/vmlinuz.01test root=/dev/hda3 ro
title vine-2005 (hdb3)
root (hd1,2)
kernel (hd1,2)/boot/vmlinuz-2.4.27-0vl7 root=/dev/hdb3 ro
title Debian-2005 (hdb6)
root (hd1,5)
kernel /boot/vmlinuz-2.4.27-2-386 root=/dev/hdb6 ro
initrd /boot/initrd.img-2.4.27-2-386
mspring@harup:~$
> mount -t {iso9960,ext2.vfat,udf} /dev/hdc /mnt でマウントできませんか?
>
名倉さまのコメントに沿って、実行したら 下のようなコメントが出ました。
harup:~# mount -t {iso9960,ext2.vfat,udf} /dev/hdc /mnt
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options].
For many more details, say man 8 mount .
上のコメントで、デバイスが /dev/hda1 or /dev/cdrom と与えられている
ように、読みました。
設定ファイル/etc/fstab の デバイス名は /dev/cdrom としていますので
分かります。
しかし、今の設定では /dev/hda1 のマウントポイントは下のように
/win_c にしています。 この点が理解できない状況です。
mspring@harup:~$ cat /etc/fstab
/dev/hda2 swap swap defaults 0 0
/dev/hda3 / ext3 defaults 1 1
/dev/hda5 /use/X11R6 ext3 defaults 1 2
/dev/hda6 /home ext3 defaults 1 2
/dev/hda7 /opt ext3 defaults 1 2
/dev/hda1 /win_c ntfs ro 0 0
/dev/fd0 /floppy ext3 user,noauto 0 0
/dev/cdrom /cdrom iso9660 user,ro,noauto,exec,iocharset=euc-jp,codepage=932 0 0
none /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
none /proc/bus/usb usbdevfs noauto 0 0
冗長な文面になりまして、申し訳ありません。
よろしくお願いします。
----------------
佐藤明彦 (Sato Akihiko)
e-mail : myspring_sato@kyp.biglobe.ne.jp
- Follow-Ups
-
- [plamo:26437] Re: ATAPIDVD-RAMがマウント(認識)できません, 名倉昭一
- [plamo:26439] Re: ATAPI DVD-RAMがマウント(認識)できません, Uetake Sadao
- References
-
- [plamo:26431] ATAPI DVD-RAMがマウント(認識)できません, msharu
- [plamo:26433] Re: ATAPIDVD-RAMがマウント(認識)できません, 名倉昭一
[検索ページ]
[メール一覧]
Plamo ML 公開システム