[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:00344] Re: How to use modem ?
-
From:Shigeo Sagai
-
Date:Thu, 10 Dec 1998 09:52:24 +0900
- Subject: [plamo:00344] Re: How to use modem ?
- From: Shigeo Sagai <sagai@xxxxxxxxxxxxxxxxxxx>
- Date: Thu, 10 Dec 1998 09:52:24 +0900
- Posted: Thu, 10 Dec 1998 09:53:25 +0000
佐賀井と申します。
>modemの設定でQを出したのですが、
>同じようなものが出ていたので参考にして少し調べました。
済みません、これがどういうモデムなのか、私にはちょっとわかりませんが、
>dmesgの結果
>Serial driver version 4.13 with no serial options enabled
>tty00 at 0x03f8 (irq = 4) is a 16550A
>tty02 at 0x03e8 (irq = 4) is a 16550A
>
>ls -l /dev/modemの結果
>lrwxrwxrwx 1 root root 5 Dec 7 08:01 /dev/modem ->
>ttyS0
>
>[plamo:00299]で小島さんが書かれていたのですが
>ttyS*の*部分が同じであればつながるとのことでしたが
>私の場合、上記のようにttyS0とttyS2の2つが同じポート(irq4)に
>わりあてられてます。
これは普通そうなります。と、言うか普通のAT機では、
com1(ttyS0), com3(ttyS2)がIRQ 4
com2(ttyS1), com4(ttyS4)がIRQ 3
を取るようになっているのです。Serialポートは、com1, com3と
なっているようですが、これはこれで正しいのですね。ただ、
モデムが、com3に接続しているとか、com1でなくてcom3にしないとダメだ
ったりとかそういうことはないのですよね。
もし検討はずれな事を言っていたらごめんなさい。
--
----+----1----+----2----+----3----+----4----+----5----+----6----+
Shigeo Sagai sagai@criepi.denken.or.jp
- Follow-Ups
-
- [plamo:00345] Re: How to use modem ?, Shigeo Sagai
- [plamo:00352] Re: How to use modem ?, Hirohisa Inoue
- References
-
- [plamo:00343] Re: How to use modem ?, Hirohisa Inoue
[検索ページ]
[メール一覧]
Plamo ML 公開システム