[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:03848] Re: ネットワークの設定について
-
From:Shigeo Sagai
-
Date:Mon, 30 Aug 1999 13:09:01 +0900
- Subject: [plamo:03848] Re: ネットワークの設定について
- From: Shigeo Sagai <sagai@xxxxxxxxxxxxxxxxxxx>
- Date: Mon, 30 Aug 1999 13:09:01 +0900
- Posted: Mon, 30 Aug 1999 13:06:26 +0900
From: Yasuto Katekawa <js6dew@ryukyu.ne.jp>
Subject: [plamo:03843] Re: ネットワークの設定について
Date: Sun, 29 Aug 1999 19:19:48 +0900
> FZR00064> ************ ネットワークカードのチップの型番は
> FZR00064> VT86C926です。(メルコのカード)
> 私も使っています。
> 安価ですよね。これ。
その安さに惹かれて、買ってはまったのは私です。
> FZR00064> Sagaiさんのアドバイスでカーネルを再構築してみました。
> FZR00064> Netwok device supportでチェックした項目は、以下の通りです。
> FZR00064> [*] Network device support
> FZR00064> <M> Dummy net driver support
> FZR00064> <M> PLIP(parallel port) support
> FZR00064> <M> PPP(point-to-point) support
> FZR00064> <M> SLIP(serial line) support
> FZR00064> [*] CSLIP compressed headers
> FZR00064> [*] keepalive and linefill
> FZR00064> [*] Ethernet (10 or 100Mbit)
>
> この下の2つのPCIは外されたほうがいいのではないでしょうか?
> FZR00064> [*] PCI Ethernet adapters
> FZR00064> [*] PCI NE2000 support
えっとぉ、PCI NE2000 supportの項目にチェックすると、こちらのドライバが
先に認識して、同じ事になります。
別途、最新のne2k-pci.cドライバを入れたのでなければ、これははずしてくだ
さい。PCI Ethernet adptersだけは残しておいて構いません。
----+----1----+----2----+----3----+----4----+----5----+----6----+----+--
Shigeo Sagai sagai@criepi.denken.or.jp
- References
-
- [plamo:03842] RE: ネットワークの設定について, Masuda
- [plamo:03843] Re: ネットワークの設定について, Yasuto Katekawa
[検索ページ]
[メール一覧]
Plamo ML 公開システム