[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:28854] Re: Xineのビデオドライバーについて
-
From:MOUE Kiyoshi
-
Date:Wed, 30 Jan 2008 18:42:06 +0900 (JST)
- Subject: [plamo:28854] Re: Xineのビデオドライバーについて
- From: MOUE Kiyoshi <kmoue@xxxxxxxxxx>
- Date: Wed, 30 Jan 2008 18:42:06 +0900 (JST)
----+----1----+----2----+----3----+----4----+----5----+----6----+----7
MOUE です.
〜≫ in reply to your mail below ≪〜
From: Plamo大好 <ilikepl@xxxxxxxxxxxxxxxxx>
Subject: [plamo:28852] Re: Xineのビデオドライバーについて
Date: Tue, 29 Jan 2008 21:40:20 +0900
> 現在、Xineの方で調べています。
>
> >> # 個人的には,xv も使えないなら,X の設定が怪しいような気がする
> 気になっていましたので、XineのFAQを眺めてみました。
>
> http://xinehq.de/index.php/faq#XVEXTENSION
> の中で
> How can I make xine use the Xv extension and what drivers do I need?
>
> ATI: if you only get "half a picture", try lowering your resolution or
> bit depth, disable DRI (looks like you ran out of video RAM)
ATI Radeon で Xv extension が使えないということでしょうか ?
$ xvinfo
の結果はどうなりますか ?
Xv extension を使用中なら,
X-Video Extension version 2.2
screen #0
Adaptor #0: "ATI Radeon Video Overlay"
number of ports: 1
port base: 115
operations supported: PutImage
supported visuals:
depth 24, visualID 0x23
とこんな風に表示されるはずですが,使えていない場合は,
X-Video Extension version 2.2
screen #0
no adaptors present
となるはずです.
> 現在のxorg.confは、
Xv が使えていないなら,
Section "Device" と Section "Screen" を ATI のドライバの
ものだけにして,
Section "Device" に,
Option "VideoOverlay" "on"
を追加してみたらどうでしょうか ?
私のところでは,ATI のドライバを使って,Radeon を Depth 24 ,
1280x1024 の設定で Xine も問題なく使えています.
--
+----------+----------+----------+----------+----------+
MOUE
- Follow-Ups
-
- [plamo:28855] Re: Xineのビデオドライバーについて, Plamo大好
- References
-
- [plamo:28829] Re: Xineのビデオドライバーについて, KOJIMA Mitsuhiro
- [plamo:28831] Re: Xineのビデオドライバーについて, Plamo大好
- [plamo:28852] Re: Xineのビデオドライバーについて, Plamo大好
[検索ページ]
[メール一覧]
Plamo ML 公開システム