[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[plamo:29626] Re: Eee PC S101 のSSDでの読み込み/書き込みエラー



  名倉@seamonkey-1.1.15 コンパイル済み テスト中 です。

> 荒木田です.
> 
> Eee PC S101 (SSD モデル),
> 
 中略
> とりあえず,S101 で Linux が動く事は確認できたのですが,
> やはり Plamer としては,頭と指がすっかり Plamo に馴染んでしまって
> いるので,なんとか Plamo をいれたい所なのですが,何か策が
> ありますでしょうか?
> 
 :/usr/src/linux/Documentation# cat kernel-parameters.txt 
 あたりに
 
        libata.force=   [LIBATA] Force configurations.  The format is comma
                        separated list of "[ID:]VAL" where ID is
                        PORT[:DEVICE].  PORT and DEVICE are decimal numbers
                        matching port, link or device.  Basically, it matches
                        the ATA ID string printed on console by libata.  If
                        the whole ID part is omitted, the last PORT and DEVICE
                        values are used.  If ID hasn't been specified yet, the
                        configuration applies to all ports, links and devices.

                        If only DEVICE is omitted, the parameter applies to
                        the port and all links and devices behind it.  DEVICE
                        number of 0 either selects the first device or the
                        first fan-out link behind PMP device.  It does not
                        select the host link.  DEVICE number of 15 selects the
                        host link and device attached to it.

                        The VAL specifies the configuration to force.  As long
                        as there's no ambiguity shortcut notation is allowed.
                        For example, both 1.5 and 1.5G would work for 1.5Gbps.
                        The following configurations can be forced.

                        * Cable type: 40c, 80c, short40c, unk, ign or sata.
                          Any ID with matching PORT is used.

                        * SATA link speed limit: 1.5Gbps or 3.0Gbps.

                        * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7].
                          udma[/][16,25,33,44,66,100,133] notation is also
                          allowed.

                        * [no]ncq: Turn on or off NCQ.

                        * nohrst, nosrst, norst: suppress hard, soft
                          and both resets.

                        If there are multiple matching configurations changing
                        the same attribute, the last one is used.

  なカーネル起動オプションがあることを知りました。このあたりのオプション指定で
  Plamo-4.6インストーラーを起動して libata モードでインストールできないかなと
  思いました。

> --
> 荒木田 英禎
> 




Follow-Ups
[plamo:29628] Re: Eee PC S101 のSSD での読み込み/書き込みエラー, Hideyoshi ARAKIDA
References
[plamo:29624] Eee PC S101 のSSDでの読み込み/書き込みエラー, Hideyoshi ARAKIDA

[検索ページ] [メール一覧]
Plamo ML 公開システム