[plamo:21070] Re: CDplamo-0.4

[pc8m-ogs]

小楠です。
いまごろですが、cdplamo-0.4をいろいろ試しています。
一般的なマシンの結果がではつまらないと思い、（私の中では最新の）
USB のキーボードに USB のマウスというマシンで試してみました。

□lspci の出力
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 05)
02:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)

auto では X の起動までいけませんでしたが、原因はマウスの設定が合わない
ことのようでした。
manual で起動後、usb の各モジュールを読み込み、XF86Config のマウスに関
する部分で、Option の "Protocol" を "IMPS/2" へ、"Device" を
/dev/input/mice" に変更することで、Xが起動できる様になりました。
他には唯一ディスプレイの "HorizSync" と "BertRefresh" を修正しています。
で、マウスを動かすと画面がちらつく（一瞬乱れるけど、その後は普通）とい
う現象がありました。
これは追求するつもりはないのですが、簡単に原因を調べたり修正できたりす
るものでしょうかねえ。


以下に /var/log/messages を付けます。

Oct 15 08:14:17 cdplamo syslogd 1.4-0: restart.
Oct 15 08:14:19 cdplamo kernel: klogd 1.4-0, log source = /proc/kmsg started.
Oct 15 08:14:19 cdplamo kernel: Loaded 427 symbols from 18 modules.
Oct 15 08:14:19 cdplamo kernel: BIOS-provided physical RAM map:
Oct 15 08:14:19 cdplamo kernel: 254MB LOWMEM available.
Oct 15 08:14:19 cdplamo kernel: Initializing CPU#0
Oct 15 08:14:19 cdplamo kernel: Memory: 252688k/260928k available (1791k kernel code, 7852k reserved, 831k data, 160k init, 0k highmem)
Oct 15 08:14:19 cdplamo kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 15 08:14:19 cdplamo kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 15 08:14:19 cdplamo kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 15 08:14:19 cdplamo kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct 15 08:14:19 cdplamo kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 15 08:14:19 cdplamo kernel: CPU: L2 cache: 256K
Oct 15 08:14:19 cdplamo kernel: Intel machine check architecture supported.
Oct 15 08:14:19 cdplamo kernel: Intel machine check reporting enabled on CPU#0.
Oct 15 08:14:19 cdplamo kernel: Enabling fast FPU save and restore... done.
Oct 15 08:14:19 cdplamo kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 15 08:14:19 cdplamo kernel: Checking 'hlt' instruction... OK.
Oct 15 08:14:19 cdplamo kernel: PCI: PCI BIOS revision 2.10 entry at 0xebabb, last bus=2
Oct 15 08:14:19 cdplamo kernel: PCI: Using configuration type 1
Oct 15 08:14:19 cdplamo kernel: PCI: Probing PCI hardware
Oct 15 08:14:19 cdplamo kernel: PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Oct 15 08:14:19 cdplamo kernel: Linux NET4.0 for Linux 2.4
Oct 15 08:14:19 cdplamo kernel: Based upon Swansea University Computer Society NET3.039
Oct 15 08:14:19 cdplamo kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 15 08:14:19 cdplamo kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Oct 15 08:14:19 cdplamo kernel: Real Time Clock Driver v1.10e
Oct 15 08:14:19 cdplamo kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 15 08:14:19 cdplamo kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 15 08:14:19 cdplamo kernel: ICH2: IDE controller at PCI slot 00:1f.1
Oct 15 08:14:19 cdplamo kernel: ICH2: chipset revision 5
Oct 15 08:14:19 cdplamo kernel: ICH2: not 100%% native mode: will probe irqs later
Oct 15 08:14:19 cdplamo kernel:     ide0: BM-DMA at 0x2480-0x2487, BIOS settings: hda:DMA, hdb:pio
Oct 15 08:14:19 cdplamo kernel:     ide1: BM-DMA at 0x2488-0x248f, BIOS settings: hdc:DMA, hdd:pio
Oct 15 08:14:19 cdplamo kernel: hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2586/240/63, UDMA(100)
Oct 15 08:14:19 cdplamo kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Oct 15 08:14:19 cdplamo kernel: Uniform CD-ROM driver Revision: 3.12
Oct 15 08:14:19 cdplamo kernel: Partition check:
Oct 15 08:14:19 cdplamo kernel:  hda: hda1
Oct 15 08:14:19 cdplamo kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02
Oct 15 08:14:19 cdplamo kernel: SCSI subsystem driver Revision: 1.00
Oct 15 08:14:19 cdplamo kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Oct 15 08:14:19 cdplamo kernel: Detecting Adaptec I2O RAID controllers...
Oct 15 08:14:19 cdplamo kernel: DC390: 0 adapters found
Oct 15 08:14:19 cdplamo kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 15 08:14:19 cdplamo kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 15 08:14:19 cdplamo kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Oct 15 08:14:19 cdplamo kernel: TCP: Hash tables configured (established 16384 bind 16384)
Oct 15 08:14:19 cdplamo kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 15 08:14:19 cdplamo kernel: RAMDISK: Compressed image found at block 0
Oct 15 08:14:19 cdplamo kernel: Freeing initrd memory: 1943k freed
Oct 15 08:14:19 cdplamo kernel: Freeing unused kernel memory: 160k freed
Oct 15 08:14:19 cdplamo kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Oct 15 08:14:19 cdplamo kernel: agpgart: Maximum main memory to use for agp memory: 202M
Oct 15 08:14:19 cdplamo kernel: agpgart: agpgart: Detected an Intel i815 Chipset.
Oct 15 08:14:19 cdplamo kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Oct 15 08:14:19 cdplamo kernel: PCI: Found IRQ 10 for device 00:02.0
Oct 15 08:14:19 cdplamo kernel: PCI: Found IRQ 11 for device 00:1f.5
Oct 15 08:14:19 cdplamo kernel: intel8x0: clocking to 41145
Oct 15 08:14:19 cdplamo kernel: Intel(R) PRO/100 Network Driver - version 2.3.18-k1
Oct 15 08:14:19 cdplamo kernel: Copyright (c) 2003 Intel Corporation
Oct 15 08:14:19 cdplamo kernel: 
Oct 15 08:14:19 cdplamo kernel: PCI: Found IRQ 5 for device 02:08.0
Oct 15 08:14:19 cdplamo kernel: e100: eth0: Intel(R) PRO/100 Network Connection
Oct 15 08:14:19 cdplamo kernel:   Hardware receive checksums enabled
Oct 15 08:14:19 cdplamo kernel: 
Oct 15 08:14:19 cdplamo kernel: usb.c: registered new driver usbdevfs
Oct 15 08:14:19 cdplamo kernel: usb.c: registered new driver hub
Oct 15 08:14:19 cdplamo kernel: usb.c: deregistering driver usbdevfs
Oct 15 08:14:19 cdplamo kernel: usb.c: deregistering driver hub
Oct 15 08:14:19 cdplamo inetd[120]: Online and ready (13 sockets)
Oct 15 08:14:20 cdplamo sshd[122]: Server listening on 0.0.0.0 port 22.
Oct 15 08:14:21 cdplamo named[125]: starting BIND 9.2.2
Oct 15 08:14:21 cdplamo named[125]: using 1 CPU
Oct 15 08:14:21 cdplamo lpd[131]: restarted
Oct 15 08:14:22 cdplamo named[128]: loading configuration from '/etc/bind/named.conf'
Oct 15 08:14:22 cdplamo named[128]: no IPv6 interfaces found
Oct 15 08:14:22 cdplamo named[128]: listening on IPv4 interface lo, 127.0.0.1#53
Oct 15 08:14:22 cdplamo named[128]: couldn't add command channel 127.0.0.1#953: file not found
Oct 15 08:14:22 cdplamo named[128]: running
Oct 15 08:17:14 cdplamo su[185]: + tty1 demo-root 
Oct 15 08:34:17 cdplamo -- MARK --
Oct 15 08:41:16 cdplamo su[245]: + tty1 demo-root