[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:20550] インストール時に HDD，CD-ROM/RW/DVDが/dev/hd*に認識されない
-
From:Hideyoshi ARAKIDA
-
Date:Fri, 12 Sep 2003 00:09:36 +0900 (JST)
- Subject: [plamo:20550] インストール時に HDD，CD-ROM/RW/DVDが/dev/hd*に認識されない
- From: Hideyoshi ARAKIDA <h.arakida@xxxxxxxxx>
- Date: Fri, 12 Sep 2003 00:09:35 +0900 (JST)
- Organization: PRC/NAOJ
初めて投稿致します，荒木田と申します．
Plamo 3.2 を DOS/V パラダイスの Prime Monarch GD
http://www.dospara.co.jp/bto/bto_f.php?gm=30&gs=84&gf=0
へインストールを試みているのですが，インストール CD から
起動すると，HDD, CD-ROM/RW/DVD が /dev/hd* に見つからず
fdisk，cfdisk で HDD のパーティションの設定が出来ない状況に
陥っております．マシンの主なスペックは，
MotherBoard : ABIT IS7 (i865PE ATX)
CPU : Pentium 4 3.0GHz
HDD : Seagate ST3120022A 120GB (Ultra ATA 7200rpm)
CD-ROM/RW/DVD : Buffalo DVR-R42FB (TOSHIBA DVD-R/RW SD-R5112)
です．インストール CD は KDD Lab の ftp から plamo-3.2.iso を
DL して作ったもので，この CD で Fujitsu LOOX T7/63 へは
問題無くインストール出来ました．
今回の Prime Monarch GD は OS 無し(HDDはまっさら)で購入したものです．
BIOS メニューやマシン起動直後のデバイスチェックでは HDD，CD-ROM/RW/DVD とも
問題無く認識されているのですが，ドライブに Plamo インストール CD を入れて
起動して root で login して dmesg すると，
...
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: (ide_setup_pci_device:) Could not enable device.
PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=24d1
PCI_IDE: chipset revision 2
PCI_IDE: 100% native mode on irq 11
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
Floppy drive(s): fd0 is 1.44M
...
となっていまして，HDD，CD-ROM/RW/DVDが /dev/hda, /dev/hdc 等に
認識されていない状況です．試しに fdisk -l をしても何も表示されません．
BIOS の Master Device PIO Mode，Master Device Ultra DMA あたりを
変えて試してみたのですが，結果は変わりませんでした．
大変初歩的な質問かもしれませんが，検索のポインタだけでも
構いませんので，何か心当りがありましたらご教授頂ければと思います．
長くなって申し訳ありませんが，以下に，dmesg，/proc/interrupts，
/proc/ioports，/proc/pci の結果を付けておきます．
それでは宣しくお願いいたします．
--
荒木田英禎
---------------------------------------------------------------------
#dmesg
Linux version 2.4.19-pre10 (root@athlon) (gcc version 2.95.3 20010315 (release)) #2 2002年 6月24日 (月) 15:12:33 JST
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Kernel command line: initrd=initrd.gz root=/dev/ram rw BOOT_IMAGE=vmlinuz
Initializing CPU#0
Detected 3006.888 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 6003.09 BogoMIPS
Memory: 902872k/917504k available (1880k kernel code, 14244k reserved, 680k data, 136k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfbc00, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router default [8086/24d0] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
NTFS driver v1.1.22 [Flags: R/O]
udf: registering filesystem
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.1
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: (ide_setup_pci_device:) Could not enable device.
PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=24d1
PCI_IDE: chipset revision 2
PCI_IDE: 100% native mode on irq 11
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
pcnet32.c:v1.27a 10.02.2002 tsbogend@alpha.franken.de
8139too Fast Ethernet driver 0.9.24
eth0: RealTek RTL8139 Fast Ethernet at 0xf880d000, 00:50:8d:4e:92:05, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi: <fdomain> Detection failed (no card)
DC390: 0 adapters found
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1399k freed
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 136k freed
#cat /proc/interrupts
CPU0
0: 17599 XT-PIC timer
1: 803 XT-PIC keyboard
2: 0 XT-PIC cascade
6: 14 XT-PIC floppy
8: 0 XT-PIC rtc
NMI: 0
ERR: 0
#cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
0378-037a : parport0
03c0-03df : vga+
03f2-03f5 : floppy
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0500-051f : PCI device 8086:24d3
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #02
a000-a0ff : PCI device 10ec:8139
a000-a0ff : 8139too
a400-a43f : PCI device 1274:5880
b000-b01f : PCI device 8086:24d4
b400-b41f : PCI device 8086:24d7
b800-b81f : PCI device 8086:24de
bc00-bc1f : PCI device 8086:24d2
c000-c007 : PCI device 8086:24d1
c400-c403 : PCI device 8086:24d1
c800-c807 : PCI device 8086:24d1
cc00-cc03 : PCI device 8086:24d1
d000-d00f : PCI device 8086:24d1
d000-d007 : ide0
d008-d00f : ide1
f000-f00f : PCI device 8086:24db
#cat pci
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 8086:2570 (rev 2).
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 8086:2571 (rev 2).
Master Capable. Latency=64. Min Gnt=12.
Bus 0, device 29, function 0:
Class 0c03: PCI device 8086:24d2 (rev 2).
IRQ 10.
I/O at 0xbc00 [0xbc1f].
Bus 0, device 29, function 1:
Class 0c03: PCI device 8086:24d4 (rev 2).
IRQ 11.
I/O at 0xb000 [0xb01f].
Bus 0, device 29, function 2:
Class 0c03: PCI device 8086:24d7 (rev 2).
IRQ 11.
I/O at 0xb400 [0xb41f].
Bus 0, device 29, function 3:
Class 0c03: PCI device 8086:24de (rev 2).
IRQ 10.
I/O at 0xb800 [0xb81f].
Bus 0, device 29, function 7:
Class 0c03: PCI device 8086:24dd (rev 2).
IRQ 9.
Non-prefetchable 32 bit memory at 0xf7000000 [0xf70003ff].
Bus 0, device 30, function 0:
Class 0604: PCI device 8086:244e (rev 194).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
Class 0601: PCI device 8086:24d0 (rev 2).
Bus 0, device 31, function 1:
Class 0101: PCI device 8086:24db (rev 2).
I/O at 0x0 [0x7].
I/O at 0x0 [0x3].
I/O at 0x0 [0x7].
I/O at 0x0 [0x3].
I/O at 0xf000 [0xf00f].
Non-prefetchable 32 bit memory at 0x40000000 [0x400003ff].
Bus 0, device 31, function 2:
Class 0101: PCI device 8086:24d1 (rev 2).
IRQ 11.
I/O at 0xc000 [0xc007].
I/O at 0xc400 [0xc403].
I/O at 0xc800 [0xc807].
I/O at 0xcc00 [0xcc03].
I/O at 0xd000 [0xd00f].
Bus 0, device 31, function 3:
Class 0c05: PCI device 8086:24d3 (rev 2).
IRQ 10.
I/O at 0x500 [0x51f].
Bus 1, device 0, function 0:
Class 0300: PCI device 102b:2527 (rev 1).
IRQ 10.
Master Capable. Latency=32. Min Gnt=16.Max Lat=32.
Prefetchable 32 bit memory at 0xf0000000 [0xf1ffffff].
Non-prefetchable 32 bit memory at 0xf2000000 [0xf2003fff].
Non-prefetchable 32 bit memory at 0xf3000000 [0xf37fffff].
Bus 2, device 2, function 0:
Class 0200: PCI device 10ec:8139 (rev 16).
IRQ 11.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xa000 [0xa0ff].
Non-prefetchable 32 bit memory at 0xf6000000 [0xf60000ff].
Bus 2, device 4, function 0:
Class 0401: PCI device 1274:5880 (rev 4).
IRQ 5.
Master Capable. Latency=32. Min Gnt=12.Max Lat=128.
I/O at 0xa400 [0xa43f].
---------------------------------------------------------------------
[検索ページ]
[メール一覧]
Plamo ML 公開システム