[plamo:03975] Re: XF86Setup ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:03975] Re: XF86Setup ?

From:遠藤裕之
Date:Thu, 16 Sep 1999 13:16:07 +0900
Subject: [plamo:03975] Re: XF86Setup ?
From: 遠藤裕之<GFD05210@xxxxxxxxxxx>
Date: Thu, 16 Sep 1999 13:16:07 +0900
Posted: Thu, 16 Sep 1999 13:15:45 +0900
遠藤と申します．

私も FMV-475NU/S に Linux を入れてます．

    Slackware → Plamo（1.3 だっけな？）→ Vine

と入れ換えて，今は Vine 1.1 になっています．
どれでも正常に 256 色表示できました．

  > 私は、FMV-475NU/S と言う古いマシンに Plamo をインストール
  > しました。このマシンは中古で買ったので、あまり詳しい
  > ことは解からないのですが、スペックは以下です。
                    ・
  >         Video CTのチップのようす、VRAMは 512KB

CT65545 だったかな？

  > これを基に、256色で600x480の画面を作ろうと長い間色々なWebや資料
  > を見ながら設定（といってもXF86Setupですが。）していましたが、
  > 結局、縞縞で流れる様な画面しかできず、この際16色でいいや！という

これですが，startx した後に，「 Fn + F10 」キーを数回押すと正常に
表示されませんか？
原因は分かりませんが，これを（毎回）すると正常に表示されます．

    # 「 Fn + F10 」は，液晶モニタ，外部接続モニタ，両方表示を
　　　切替するキーです．

ちなみに，X からコンソールに戻るときも，変な表示になるので，この
キーで復活させます．


以下に 私の環境の XF86config を添付します．
参考になりますでしょうか？

    # Vine のやつですが，ほとんど同じでしょう．
      TrueType の実装の仕方とかが違っていた記憶があるので
      FontPath のところは変えた方が良いかな？

      Plamo 1.4 と Vine 1.1 で xfree86 のバージョンが違って
      いたら，そのまま使えないかもしれませんが．．．

      コメント行は，ところどころ削除してあります．
      nifty から送信しているので，300 行以上の送信ができない
　　　ので．．．



---------- ここから ----------


Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

    FontPath   "/usr/X11R6/lib/X11/fonts/local"
    FontPath   "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath   "/usr/X11R6/lib/X11/fonts/japanese"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi"

EndSection

Section "ServerFlags"

EndSection

Section "Keyboard"

    Protocol	"Standard"

    AutoRepeat	500 5

    LeftAlt	   Meta
    RightAlt	    Meta
    ScrollLock    Compose
    RightCtl	   Control

    XkbDisable

   XkbKeycodes	   "xfree86"
   XkbTypes	   "default"
   XkbCompat	   "default"
   XkbSymbols	   "us(pc101)"
   XkbGeometry	   "pc"
   XkbRules	   "xfree86"
   XkbModel	   "pc101"
    XkbLayout	    "us"
EndSection

Section "Pointer"
    Protocol	"PS/2"
    Device	"/dev/mouse"

    Emulate3Buttons
    Emulate3Timeout    50

EndSection

Section "Monitor"

    Identifier	"LCD Panel 640x480"
    VendorName	"Unknown"
    ModelName	"Unknown"

    HorizSync	31.5

    VertRefresh 60

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664	760  800   400	409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664	760  800   480	491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824	896 1024   600	601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
#Modeline "1024x768"	44.9  1024 1048 1208 1264   768  776  784  817 Interla
ce

# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680	720  864   480	488  491  521
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840	968 1056   600	601  605  628 +hsync +
vsync

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856	976 1040   600	637  643  666 +hsync +
vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768	771  777  806 -hsync -
vsync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768	771  777  806 -hsync -
vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
#Modeline "1280x1024"	80    1280 1296 1512 1568  1024 1025 1037 1165 Interla
ce

# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768	784  787  823
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064

# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336	384  400   200	204  205  225 Doublesc
an
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336	384  400   240	245  246  262 Doublesc
an
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336	384  400   240	244  246  262 Doublesc
an
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416	448  512   300	301  602  312 Doublesc
an
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416	480  528   300	301  303  314 Doublesc
an
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424	488  520   300	319  322  333 Doublesc
an
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496	536  616   300	301  302  312 Doublesc
an
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496	576  632   300	301  303  314 Doublesc
an
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496	576  632   300	301  303  314 Doublesc
an
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504	584  624   300	319  322  333 Doublesc
an

EndSection

Section "Device"
    Identifier	      "Generic VGA"
    VendorName	      "Unknown"
    BoardName "Unknown"
    Chipset   "generic"

#    VideoRam 256

#    Clocks   25.2 28.3

EndSection

# Device configured by Xconfigurator:

Section "Device"
    Identifier	"My Video Card"
    VendorName	"Unknown"
    BoardName	"Unknown"
    #VideoRam	 512
# Option "noaccel"
# Option "no_bitblt"
# Option "xaa_no_color_exp"
# Option "xaa_benchmark"
# Option "hw_cursor"
# Option "mmio"
# Option "use_18bit_bus"
# Option "hw_clocks"
# Textclockfreq 25.175
# Option "nolinear"
# MemBase 0x03b00000
# Device section for C&T cards.
# Option "suspend_hack"
# Option "STN"
# Option "no_stretch"
# Option "no_center"
# Option "use_modeline"
# Option "fix_panel_size"
# videoram 512
    # Insert Clocks lines here if appropriate
EndSection

Section "Screen"
    Driver	"svga"
    # Use Device "Generic VGA" for Standard VGA 320x200x256
    #Device	 "Generic VGA"
    Device	"My Video Card"
    Monitor	"LCD Panel 640x480"
    Subsection "Display"
	Depth	    8
	# Omit the Modes line for the "Generic VGA" device
	Modes	    "640x480"
	ViewPort    0 0
	# Use Virtual 320 200 for Generic VGA
	Virtual     0 0
    EndSubsection
EndSection

Section "Screen"
    Driver	"vga16"
    Device	"Generic VGA"
    Monitor	"LCD Panel 640x480"
    Subsection "Display"
	Modes	    "640x480" "800x600"
	ViewPort    0 0
	Virtual     800 600
    EndSubsection
EndSection

Section "Screen"
    Driver	"vga2"
    Device	"Generic VGA"
    Monitor	"LCD Panel 640x480"
    Subsection "Display"
	Modes	    "640x480" "800x600"
	ViewPort    0 0
	Virtual     800 600
    EndSubsection
EndSection

Section "Screen"
    Driver	"accel"
    Device	"My Video Card"
    Monitor	"LCD Panel 640x480"
    Subsection "Display"
	Depth	    8
	Modes	    "640x480"
	ViewPort    0 0
	Virtual     0 0
    EndSubsection
EndSection


---------- ここまで ----------



----
遠藤 裕之     GFD05210@nifty.ne.jp
Prev by Date: [plamo:03974] Re: XF86Setup ?
Next by Date: [plamo:03976] Re: XF86Setup ?
Previous by thread: [plamo:03981] Re: XF86Setup ?
Next by thread: [plamo:03978] about Wnn In Plamo2.0a
Index(es):
- Date
- Thread
[検索ページ] [メール一覧]
Plamo ML 公開システム